|
|
|
|
| Welcome, Guest | Home | Search | Login | Register | |
|
Profile Info |
|
| Summary | Show Posts |
| Show Posts | |
| This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to. | |
| Messages - DerekLewis | |
|
1
Hardware / Diagnose blank video output
July 21, 2023, 07:05 |
Hello, I have a Mac IIci with a recapped mainboard that boots with correct chimes though the onboard video is blank. I bypassed the problem with a Nubus video card, but I would like to diagnose the onboard video, if only to eliminate soldier bridges or a bad cap. |
|
2
Software / Re: PS to PDF conversion in Acrobat
May 13, 2023, 05:45 |
I know it’s been a while. Had some time to work on my document conversion to PDF again. I have the AdobePS driver installed and set for a virtual printer using the Apple LaserWriter PS/600 template. Any recommendations on printer settings? |
|
3
Software / Re: PS to PDF conversion in Acrobat
June 19, 2022, 01:28 |
I will test converting my Word files with the AdobePS print driver -> Distiller -> PDF with embedded fonts, then check the PDF on Windows. |
|
4
Software / Re: PS to PDF conversion in Acrobat
June 18, 2022, 04:55 |
Would I get a better conversion to PDF if I exported the Postscript files from the Macintosh and convert on the Windows machine? |
|
5
Software / Re: PS to PDF conversion in Acrobat
June 16, 2022, 17:30 |
My system configuration is a Mac IIci running system 7.1 with MS Word and WirdPerfect installed. I have Adobe Acrobat 3.0 and the LaserWriter 8.1 driver for creating PS files and converting to PDFs. I have to try the AdobePS driver to see how good a job it does in creating PS files for Distiller though. I also have a windows XP laptop that supports a SCSI interface and MacDrive for reading files from the Macintosh disks. |
|
6
Software / Re: PS to PDF conversion in Acrobat
May 07, 2022, 23:38 |
Were you able to find the patches for Acrobat 3? |
|
7
Software / Re: PS to PDF conversion in Acrobat
April 05, 2022, 00:39 |
Can you post the link or upload to Macintoshgarden? |
|
8
Software / Re: PS to PDF conversion in Acrobat
April 03, 2022, 21:27 |
Yes, that is the version I installed. I didn’t see a patch on the Adobe site. |
|
9
Software / Re: PS to PDF conversion in Acrobat
March 24, 2022, 19:55 |
On a related question, are there any patches for Adobe 3.0 posted in Macintoshgarden? |
|
10
Software / Re: PS to PDF conversion in Acrobat
March 23, 2022, 17:41 |
I have photoshop 3.0.5 installed right now. |
|
11
Software / Re: PS to PDF conversion in Acrobat
March 23, 2022, 17:25 |
Which version of photoshop would you recommend? |
|
12
Software / Re: PS to PDF conversion in Acrobat
March 22, 2022, 16:22 |
I am using the Laserwriter v8.1 driver for EPS File output. Would switching to v8.5 be of benefit? |
|
13
Software / Re: PS to PDF conversion in Acrobat
March 19, 2022, 00:19 |
When print to a PS file and distill into a PDF with Adobe Acrobat 3.0; then print to my StyleWriter II, I notice that some graphics are rendered differently (different line or curve style) or not in same position like equation superscripts versus printing from Word/WordPerfect directly to the StyleWriter II. I use the LaserWriter 8.1 driver to provide the save to PS option as it is not available on the StyleWriter. |
|
14
Software / PS to PDF conversion in Acrobat
March 17, 2022, 20:32 |
Hello, Following recommendations from other threads, I am using the LaserWriter 8.1 driver to print documents from WordPerfect/Word to PS format and then convert to PDF via Adobe Acrobat 3.0. The conversion almost works though I still get some differences in the embedded graphics of the final PDF file. Are there recommended settings or a better method to print the PS file? I am running System 7.1 on a Mac IIci. |
|
15
Hardware / Re: StyleWriter II repair?
July 12, 2021, 16:29 |
Thanks for your replies, I will follow up with Herb though he may be out of business now. Derek |
| Pages: [1] 2 3 | |
|
© 2021 System7Today.com. |
