|
|
|
|
| Welcome, Guest | Home | Search | Login | Register | |
| Author | SCSI hard drives (Read 112 times) | ||||||||||
|
ShinobiKenobi
256 MB  Posts: 362 System 7 fan 
|
on: February 10, 2026, 06:06
The hard disk that came in my LC III, I found out just now, is still good. I had updated the disk driver, and then my LC III could no longer see the disk. I didn't know that would happen. I thought "updating" it would be good, since it usually is for most things. The only thing that would make sense is that, for God knows why, I took it out of the LC III and put it into my 7200. Maybe there was some problem with it, and I wasn't able to fix it on the LC. Anyway, it still has the files that the previous owner had. The LC III doesn't see the disk in Apple HD SC Setup. It just says no SCSI devices/drives found. Since I already bought another hard disk for the LC III, I wonder if this can be used in my Macintosh SE. Is it possible to downgrade the driver on the disk? I know from using Apple HD SC Setup in the past, that there is a small partition for the driver. However, this one only had one partition, Macintosh HFS. |
||||||||||
Last Edit: February 10, 2026, 06:07 by ShinobiKenobi
|
68kmac
|
32 MB Posts: 51 System 7 Newcomer!
Reply #1 on: February 10, 2026, 11:50
|
Try Lido 7 on your LC. Maybe that will work (I am using Lido on every Mac).
|
ShinobiKenobi
|
256 MB Posts: 362 System 7 fan
Reply #2 on: February 12, 2026, 04:55
|
I tried Lido 7.56, when I had them both installed, which results in multiple warnings/errors: Inquiry and request auxiliary sense commands failed! Unable to read drive's capacity! OSErr = 5 Bad SCSI Command: phase error. OSErr = 5 Bad SCSI Command: phase error. Oh well, Finding out that two out of four are good isn't a bad surprise haha.
Last Edit: February 13, 2026, 01:04 by ShinobiKenobi
|
|
Pages: [1]
|
| |||
|
© 2021 System7Today.com. |
