|
|
|
|
| Welcome, Guest | Home | Search | Login | Register | |
| Author | Desktop Printer Utility and PPDLib (Read 6595 times) | ||||||||||
|
ianj
16 MB  Posts: 19 
|
on: September 17, 2007, 01:16
I had a USB printer connected to my OS X Mac set up as a desktop printer on my Quadra 840AV (using LaserWriter 8.6 and the instruction on this site), but I reinstalled the OS a while ago. I just went to open Desktop Printer Utility to re-create the desktop printer, but I got this message: Code: [Select] The application "Desktop Printer Utility" could not be opened because "PPDLib" could not be found.I can't find any file called PPDLib on my computer, and I can't find any information about it online. I even reinstalled the LaserWriter 8.6 software with no luck. Could anyone tell me what's going on? Thanks in advance. |
||||||||||
|
dpaanlka
|
1024 MB Posts: 1646
Reply #1 on: September 17, 2007, 02:15
|
Perhaps check to make sure that all appropriate printing extensions are enabled? Also make sure you have every available update to your computer located at the updates page: http://main.system7today.com/updates.html
|
wove
|
1024 MB Posts: 1363
Reply #2 on: September 17, 2007, 04:42
|
A PPD file is a postscript printer description file. PPDlib(.h) is a header file used by a compiler to compile software. Often a call is a library that does not exist, or should not exist is an indication that some piece of software is corrupt or improperly installed. I would try installing again with the Laserwriter software. You should be using version 8.6, 8.6.1 and later versions are for newer OSes. If that does not correct the problem, I would reinstall the OS. bill
|
|
Pages: [1]
|
| |||
|
© 2021 System7Today.com. |
