|
|
|
|
| Welcome, Guest | Home | Search | Login | Register | |
| Author | IX Twin Turbo (Read 12936 times) | ||||||||||
|
Pwr_mac_beige_g3
8 MB  Posts: 15 
|
on: August 30, 2006, 02:12
After installing the drivers, I went to the control panel and set the gama to mac standard. Then i went to the monitors control panel and selected to use system gama. When i restart I always get low resolution and I can not figure out how to get the resolution back to where I had it set. It was at 1024 x 768. Any ideas? |
||||||||||
|
RacerX
|
32 MB Posts: 36
Reply #1 on: August 30, 2006, 02:51
|
I've found that there are a lot of cards out there that are listed as Twin Turbos because that is the processor on the card and not because that was the card itself. For example, I got both an Ultimate Rez and Pro Rez while buying what was listed as "Twin Turbos". Neither of these cards work correctly with the standard Twin Turbo drivers for the Mac. You can find additional drivers for some cards that use the Twin Turbo chip set here.
|
Pwr_mac_beige_g3
|
8 MB Posts: 15
Reply #2 on: August 30, 2006, 03:18
|
i am glad you posted that. I do have an IX3D that i didnt have drivers for, but my problem is with a TT128M8 rev. 3.6 card. I restarted and it is back to 1024 x 768, who know what it will be after i install the rest of the software or just a reboot.
|
|
Pages: [1]
|
| |||
|
© 2021 System7Today.com. |
