|
|
|
|
| Welcome, Guest | Home | Search | Login | Register | |
| Author | StyleWriter II repair? (Read 27378 times) | ||||||||||||||||||||||
|
DerekLewis
32 MB  Posts: 33 
|
on: July 08, 2021, 06:19
Hello, I have a StyleWriter II paired with a Mac IIci running 7.1 that works almost fine except that the small rubber wheels on the feed mechanism have lost their rubber “tires” causing the paper feed to drag a bit. Can the feed be repaired or should I get a new printer? |
||||||||||||||||||||||
|
Bolkonskij
|
Administrator 1024 MB  Posts: 2023
Reply #1 on: July 09, 2021, 09:25
|
That's a tough one. I don't have a StyleWriter II (only briefly had the first StyleWriter, that was years ago), so I can't share from my own experience. I guess you already searched for replacement on ebay.com, so if you couldn't find anything, a good idea might be to look for replacements in unusual places - any other (household) devices that use such a ring or similar? Again, I do not know the StyleWriter II specifics and how much tolerance there is on these wheels but I found you often can take other things and make them fit. The Russian way of fixing things ;-) Another option would indeed be getting another StyleWriter II and use it for parts. I'm not a fan of buying extra stuff, but in that case it might be a good investment as it will give you all the spare parts you may need in the future. btw - nice 90's work setup! ;-)
|
mac-cellar
|
128 MB Posts: 176 Gotta love System 7
Reply #2 on: July 09, 2021, 17:00
|
Not sure where you are located, but you could check out this site: http://www.retrotechnology.com/herbs_stuff/mac.html He's been selling old Macs and parts here for many years, and has a page devoted to printers and parts. Might be worth asking if he has anything available.
|
DerekLewis
|
32 MB Posts: 33
Reply #3 on: July 12, 2021, 16:29
|
Thanks for your replies, I will follow up with Herb though he may be out of business now. Derek
|
mac-cellar
|
128 MB Posts: 176 Gotta love System 7
Reply #4 on: July 12, 2021, 18:11
|
Some good news - I exchanged emails with Herb Johnson late last week about a part I'm looking for. He's still in business.
|
Neal_SE30
|
256 MB Posts: 401 System 7 Newcomer!
Reply #5 on: December 06, 2022, 20:46
|
I believe it was a rebadged cannon bubblejet with a few tweaks bjc-4400 or 4200. So a few more options for parts. I need to get an ink cartridge for mine. I keep forgetting
|
|
Pages: [1]
|
| ||||||
|
© 2021 System7Today.com. |
