|
|
|
|
| Welcome, Guest | Home | Search | Login | Register | |
| Author | Accessing PowerMac 5500 CD-Rom (Read 19222 times) | ||||||||||
|
rwarning
2 MB  Posts: 3 
|
on: July 04, 2006, 07:36
For the life of me I cannot get the CD-Rom out of a PowerMac 5500 I recently acquired. When I open up the front I see a metal tab the looks as if it should be pulled up, or pushed down, while pulling forward to remove the drive, but no-matter what I try it will not budge. Opening up the back gives no hints as to how to remove the drive. |
||||||||||
|
dpaanlka
|
1024 MB Posts: 1646
Reply #1 on: July 04, 2006, 07:52
|
If you mean the physical drive itself, it is screwed into a tray. The trah is what you need to pull out. It has a tab in the middle of the front. They can be very difficult to get out sometimes.
|
rwarning
|
2 MB Posts: 3
Reply #2 on: July 04, 2006, 15:48
|
There was some random bit of crap wedging in there that was causing it to get stuck. Opening up the back, and giving it a bit of a shove while holding down the tab did it. Thanks though.
|
|
Pages: [1]
|
| |||
|
© 2021 System7Today.com. |
