|
|
|
|
| Welcome, Guest | Home | Search | Login | Register | |
| Author | plotters in classic os (Read 16937 times) | ||||||||||
|
madmann
256 MB  Posts: 284  
|
on: June 18, 2008, 15:30
I would like a wide format plotter that runs in classic os it would be nice to operate in 7.6 but not mandatory. i have been trying to understand how plottergeist and power plot work. But how do you connect to the plotter it will not likely be scsi? please give any info you have s well as recommended plotters. michael |
||||||||||
|
wove
|
1024 MB Posts: 1363
Reply #1 on: June 18, 2008, 19:00
|
MircoSpot the makers of MacDraft created plotter drivers for use with MacDraw and they were included with MacDraw. I think if you dig through their site you will still find the old package. It is probably no longer available, but you might find information about supported plotters and connection methods. We have some big HP plotters at work, they are not used with Macs, but when I installed them I did notice that they have a serial port, so in theory anyway they could communicate with an old Mac. bill
|
madmann
|
256 MB Posts: 284
Reply #2 on: June 19, 2008, 02:37
|
i know the hp 800ph something will work but$3000. finding the serial cable may also be difficult i also found acdee for mac which will work with os 7 to 9 and x. i believe it will produce hpgl outputs
|
|
Pages: [1]
|
| |||
|
© 2021 System7Today.com. |
