|
|
|
|
| Welcome, Guest | Home | Search | Login | Register | |
| Author | Help I want 7.6 on my Powermac6100/66 (Read 36139 times) | ||||||
|
dpaanlka
1024 MB  Posts: 1646 
|
Reply #15 on: December 09, 2010, 23:08
I'm sure lots of old authentic Apple-branded SCSI drives can be had at the LEM Swaplist: http://lowendmac.com/lists/swap.html I myself bought two 10 GB Seagate Barracudas on Ebay for like $10, and then bought two adapters because of the incompatible pins, and they've worked fine for about six years now even with the standard unmodified Apple Disk Utility. |
||||||
|
highlandcattle
|
8 MB Posts: 9
Reply #16 on: December 09, 2010, 23:41
|
Guys, It seems that the problem was not the Hard Drive but the PRAM battery. The battery I had in my 6100/66 had a little juice left. After some googling it turn out the 6100 has some bad behaviour when it comes to low pram batteries. So I'm going to blame it on that  . Today it even refused to show anything on screen while the hd booted up normally I could here the warning signal that tells me my clock isn't set right.
|
|
Pages: 1 [2]
|
| ||
|
© 2021 System7Today.com. |
